![]() |
|
IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Game locked up in one of the single missions. Got a launch failure notice.
|
#2
|
|||
|
|||
![]()
i got a recording of the mirror magnifieing but look at this image i took. is the ground details right or no?
http://steamcommunity.com/profiles/7...57/?tab=public another thing. why does the aircraft not have nav and landing lights? Last edited by 131st_Impact; 05-08-2011 at 07:29 PM. |
#3
|
|||
|
|||
![]()
S!
this may be an error on my part but i have my doubts. i been trying to create a simple multiplayer game. a map with little land and pick the planes for each side. when i go to test it i cant get into a aircraft no matter what team i create a aircraft. it appears but ai have taken over it and i cant get in then. so i figure i wil ltake a look at the pre made missions and figure out what im doing wrong. they all looked the same as my own mission. so i load up a pre made mission . (just dogfight btw) and i cant get into the aircraft there neither. ai take over them aircraft soon as i create them too. anybody got any clue what im doing wrong? tbh i dont like the way the multiplayer has been set out. its too difficult. i want to pick my plane my weapons take off and fly. |
#4
|
|||
|
|||
![]()
S! to everyone ...
My Joystick, a "Saitek Cyborg X", freezes randomly with CloD. In works fine with Il2-1946, Rise of Flight - no freezes at all - only with CloD. After freezing I just unplug from USB-Port and replug it - Joystick is working again until next freeze which is a little annoying. (Win7 64) |
#5
|
||||
|
||||
![]() Quote:
Have a look at this and see if it helps:- http://forum.1cpublishing.eu/showpos...42&postcount=3 by the way I have found that you can 'grab' an AI aircraft sometimes and 'Enter' it but as I haven't bothered much I can't be sure where or when I did that. Ahem.... probably a pointless comment ![]()
__________________
klem 56 Squadron RAF "Firebirds" http://firebirds.2ndtaf.org.uk/ ASUS Sabertooth X58 /i7 950 @ 4GHz / 6Gb DDR3 1600 CAS8 / EVGA GTX570 GPU 1.28Gb superclocked / Crucial 128Gb SSD SATA III 6Gb/s, 355Mb-215Mb Read-Write / 850W PSU Windows 7 64 bit Home Premium / Samsung 22" 226BW @ 1680 x 1050 / TrackIR4 with TrackIR5 software / Saitek X52 Pro & Rudders |
#6
|
|||
|
|||
![]() |
#7
|
|||
|
|||
![]()
[QUOTE=klem;280801]Ths may help. When you create a dogfight server create Spawn Areas not Aircraft.
Hi mate thanks for the reply. i have done exactly what u have told. i started a new map. 2 spawn areas 1 red 1 blue. followed your instructions down to the T and i am still getting the same thing? i launch it i select my side. then i pick an aircraft then hit create. then it spawns on the runway i click it then enter and pilot appears i hit enter but nothing happens i can click fly and watch the ai fly it though. |
#8
|
|||
|
|||
![]()
Still have sometimes the shaking of BF109 engine without any reason (levelflight,temps between 80-100°).
Using latest patch. |
#9
|
|||
|
|||
![]()
[QUOTE=klem;280801]Ths may help. When you create a dogfight server create Spawn Areas not Aircraft.
ok i dont know if u would class this as a bug or not. i may just be missing something. but i set my game to full real accept cockpit always on. that is the reason i could not join my created aircraft. i tried several time and almost gave up then i turned on a option that alowed me to change to different aircraft and even take over ai aircraft and i spawned into the aircraft i created from then on.. |
#10
|
||||
|
||||
![]()
[QUOTE=131st_Impact;281493]
Quote:
1. To select aircraft or create them you must uncheck the 'Cannot Switch planes' etc. entries in Realism settings. I usually uncheck all of that group but you can decide to limit some options for players like 'Cannot Switch Sides'. 2. If you only created Spawn Areas its possible you 'Created' an aircraft and then left it (Escape) so it would stay Created and you might see it as an 'Aircraft' that you could select and 'Enter'. Usually when you only have Spawn Areas and you select an Army then an Airfield, the aircraft available only appear on a list on the right hand side of the 'Map screen' where you choose the a/c you want from the likst you provided in the mission builder. You don't usually see actual aircraft, at least not right off. 3. You may have created 'Aircraft' as well as 'Spawn Areas' because to select an aircraft on the map and 'Enter' it, it would have to be an 'Aircraft' (or one of a Group) you placed on the Airfield (unless it was a 'leftover' previously Created as in 2. above). So after creating your simple dogfight server with Spawn Areas only, create a server, set the Realism as above then load the mission. It should work ok.
__________________
klem 56 Squadron RAF "Firebirds" http://firebirds.2ndtaf.org.uk/ ASUS Sabertooth X58 /i7 950 @ 4GHz / 6Gb DDR3 1600 CAS8 / EVGA GTX570 GPU 1.28Gb superclocked / Crucial 128Gb SSD SATA III 6Gb/s, 355Mb-215Mb Read-Write / 850W PSU Windows 7 64 bit Home Premium / Samsung 22" 226BW @ 1680 x 1050 / TrackIR4 with TrackIR5 software / Saitek X52 Pro & Rudders |
![]() |
Thread Tools | |
Display Modes | |
|
|