Fixing Roll

[bongodriver]

I should have mentioned I don't seem to be struggling with the same problem on my hardware, in actual fact I have been cruising the spit almost hands off, so I will grant that I may be making an assumption and some of you guys may be experiencing a problem, seems there are a few 'bugs' that affect some more than others.

[BlackbusheFlyer]

Fair point, perhaps it is caused by a controller issue. I use the CH Products fighterstick, Pro Throttle and the Pro Pedals I have the input curves set to be linear in nature and have calibrated them use the CH Control Manager. At the moment I find I need to use about a quarter of the movement range to counter the roll with no slip/skid for level flight at cruise power (so 25% deflection), would be interested to hear if others with these controls also find the same.

[Victory205]

Originally Posted by BlackbusheFlyer

Fair point, perhaps it is caused by a controller issue. I use the CH Products fighterstick, Pro Throttle and the Pro Pedals I have the input curves set to be linear in nature and have calibrated them use the CH Control Manager. At the moment I find I need to use about a quarter of the movement range to counter the roll with no slip/skid for level flight at cruise power (so 25% deflection), would be interested to hear if others with these controls also find the same.

Does the Fighterstick have integral trim wheels in roll and pitch to counter this? I had an old game port version that did, and am thinking of buying the USB version for this reason.

Thanks