Constructive explanation of issues

[dflion]

I have just upgraded my system from Windowa XP to Window 7 and increased my RAM from 3Gb to 8GB - so have been 'off the air' for a few days?

Today, I finally got back into the COD after a (1 day download from Steam? and 5 days getting the Windows set-up working?) - its a bit slower down in OZ??) and finally started flying the Hurricane. On the new system, I still had to 'dumb down' everything (graphics)? to get the whole thing working at a a reasonable FPS?

I am having problems getting 'ATI Catylist' to work in 'Windows 7' ( I would like any thoughts on this?) so I don't think my video graphics are working at their best?

I have attached a 'jpeg' showing some of my graphic problems , now that I have upgraded? My graphics were better on my old XP system? Ilya you have to quickly go to '4 Cores' to get everything working properly in this flight sim - sadly members will have to upgrade!

System specs.
Operating system: Windows 7 Professional 64-bit
Motherboard: Gigabyte P35-DS4
Processor: Intel (R) Core (Tm) 2 Extreme CPU Q6850 @ 3.00ghz
Memory: 8192MB RAM
Pagefile: 1893MB used, 14485MB available
Direct X version: Direct X 11
Display: Benq 1920x1200 (32bit) (59hz)
Video card: ATI Radeon HD 4870x2
Driver version: 8.831.2.0
Memory: 1768MB

See attached jpeg?

DFLion

[Stefem]

Originally Posted by dflion

I have just upgraded my system from Windowa XP to Window 7 and increased my RAM from 3Gb to 8GB - so have been 'off the air' for a few days?

Today, I finally got back into the COD after a (1 day download from Steam? and 5 days getting the Windows set-up working?) - its a bit slower down in OZ??) and finally started flying the Hurricane. On the new system, I still had to 'dumb down' everything (graphics)? to get the whole thing working at a a reasonable FPS?

I am having problems getting 'ATI Catylist' to work in 'Windows 7' ( I would like any thoughts on this?) so I don't think my video graphics are working at their best?

I have attached a 'jpeg' showing some of my graphic problems , now that I have upgraded? My graphics were better on my old XP system? Ilya you have to quickly go to '4 Cores' to get everything working properly in this flight sim - sadly members will have to upgrade!

System specs.
Operating system: Windows 7 Professional 64-bit
Motherboard: Gigabyte P35-DS4
Processor: Intel (R) Core (Tm) 2 Extreme CPU Q6850 @ 3.00ghz
Memory: 8192MB RAM
Pagefile: 1893MB used, 14485MB available
Direct X version: Direct X 11
Display: Benq 1920x1200 (32bit) (59hz)
Video card: ATI Radeon HD 4870x2
Driver version: 8.831.2.0
Memory: 1768MB

See attached jpeg?

DFLion

Disable crossfire, it help a lot, and maybe plan to upgrade your graphics hardware.

This thread is not meant for technical assistance, is titled "Constructive explanation of issues", so describe the issue in a way that it can be reproduced by the Oleg's team, and please don't pollute this thread!

[dflion]

Stefem, thanks for your answer. I am not sure if crossfire has been disabled because I can't access the ATI Catylist control centre in Windows 7. Hopefully, one day I will be able to upgrade my graphics card when I can afford it?

DFLion

PS I have now found the right thread to put this in!

[klem]

I used Searchlight Object "Height Light" in a test night time mission, two at the end of each runway.

The lights can be seen through the cockpit panel which is helpful but not right

[etzi]

as you can see on the picture.

[senseispcc]

Originally Posted by etzi

as you can see on the picture.

This are the graphics of the end of the world/map.

[klem]

Originally Posted by senseispcc

This are the graphics of the end of the world/map.

Don't go there - you'll fall off
[sorry ]

[JZG_Con]

@ dflion...you have agood system there no need to upgrade anymore ..the 4870x2 is a awsome card and is on par with the hd5870..all you need it the right drivers from ATI website ,,download 10.4 ..drivers uninstall old ones and replace with these , they are out dated but work well with the 4870x2 ..try that
As to your photo, i have the same on mine its the game its not finished also..sounds like ati ccc isnt loaded ..hence why you cant get into ccc...i have win7 works ok ..

It seams that v-sync is not working properly....I had few minor (but noticable) screen tearing with vsync set to ON (triple buffering also ON)...with vsync OFF it was almost the same...maybe just a bit more noticable

[Kankkis]

Originally Posted by Tvrdi

It seams that v-sync is not working properly....I had few minor (but noticable) screen tearing with vsync set to ON (triple buffering also ON)...with vsync OFF it was almost the same...maybe just a bit more noticable

Not working, i see it from FPS too.

Kankkis