Joystick/Throttle/Pedals not recognized

[123-Wulf-123]

Nope, you can use as many USB devices as you want in Il-2, and likewise in CoD.

[emtguf]

I only have 3 devices anyway. Joystick, Throttle, and pedals.
I do have a collective I built for Blackshark, but it remains unplugged if I am not flying as the cord gets in the way.

This is definitely an issue within this game that the devs are going to have to straighten out. I hope they have it fixed before the American release or they are going to have a lot more people pissed.

i have a Microsoft sidewinder (that works fine in il2 1986, wings of prey and rise
and don't recognize in il2 cliffs of Dover, only buttons.

this is my conf.ini
[rts]
tickLen=30
;ProcessAffinityMask=2
maxTimerTicksInRealTick=20
; 0 - not use, 1 - show cursor and not capture, 2 - not show cursor, and capture
mouseUse=2
; 0 - not use, 1 - use if hardware exist
joyUse=1
; 0 - not use, 1 - use if hardware exist
trackIRUse=1
DisableIME=0
culture=en-GB

[rts_mouse]
SensitivityX=1.0
SensitivityY=1.0
SensitivityZ=1.0
Invert=0
SwapButtons = 0

[rts_joystick]
FF=1

[MOH_Hirth]

[QUOTE=horrido;258476]i have a Microsoft sidewinder (that works fine in il2 1986, wings of prey and rise
and don't recognize in il2 cliffs of Dover, only buttons.


I was with this problem too, just need click to open a box, save as... load the profile.

[Dano]

Just built my new system and my controllers are no longer seen by CoD either, they worked perfectly on the old system which was running all the same software.

[Bibi]

Hi Hirth,
I was with this problem too, just need click to open a box, save as... load the profile.

However, exactly this does not function with some just
Best Regards. Bibi

[123-Wulf-123]

BiBi......do you have a Saitek type gaming keyboard? If youy do it may be whats causing the problem.

See Dano's post in the controls section.

All my controllers are now seen by CoD

[David198502]

ch fighterstick here and win7 64bit...never had problems with the stick,...but would like to use the mousewheel as an axis.

[brando]

Originally Posted by 123-Wulf-123

Nope, you can use as many USB devices as you want in Il-2, and likewise in CoD.

I can't even get three USB devices to work, viz. my CH HOTAS. I have managed to enable the X, Y and Z axes on the Fighterstick (Elevator, Aileron and Throttle) but I am unable to get my rudder pedals recognised, nor the further three axes which I use for trims, based on a third CH PCB.

[123-Wulf-123]

I'm in the same boat I can get axes INGAME depending on what .ini I load, but trying to use CH mapped mode, or trying to assign the axes using the controls section, clicking on axes etc, SIMPLY DOES NOT WORK, I believe it to be a Win7 64 bit/COD problem, rather than my controllers which all work perfectly in 46.