Controller axes not being picked up by game

[SsSsSsSsSnake]

Wulf.i am running same as you 3 CH setup win 7 64bit and it picks them all up,anything you want me to test?

[123-Wulf-123]

Are you running them with the CH Software mapped?

I have tried disabling and enabling the Steam-Cloud setting and while it seems to delete all controllers and assignments, it still does not allow the game to pick up the axes .

When I clich the Clear box followed by the change box a new box pops up which like the old IL2 46 is meant to pick up on any control you move, however absolutely nothing happens.

I'm stumped but I'm sure it's a simple tick box somewhere I'm missing.

[SsSsSsSsSnake]

Originally Posted by 123-Wulf-123

Are you running them with the CH Software mapped?

I have tried disabling and enabling the Steam-Cloud setting and while it seems to delete all controllers and assignments, it still does not allow the game to pick up the axes .

When I clich the Clear box followed by the change box a new box pops up which like the old IL2 46 is meant to pick up on any control you move, however absolutely nothing happens.

I'm stumped but I'm sure it's a simple tick box somewhere I'm missing.

im not using the CH software .i have steam cloud disabled.

[SsSsSsSsSnake]

ive had an idea. ok it doesnt pick yopur stick up wehn you move the stick right,what about when you move the trottle or pedals under the aileron setting in other words is it seeing your pedals or throotle as the main stick?

[123-Wulf-123]

Snake I have done a bloody war dance on all the controllers just to get any response..... ZILCH.

[SsSsSsSsSnake]

lol ok sorry M8,dam this is bugging me now

[SsSsSsSsSnake]

if you do get it working the dam rudder setting yaws you to the left no matter wether you use left or right rudder and even the keys z moves rudder right and key x moves it left,

[Redroach]

Is it only the axes? If yes, then you could try to enter stick axes manually into whatever your key configuration savefile is - that's what I did when my axes weren't recognized, too, and it worked (save for having to reconfigure throttle sensitivity etc. everytime I log in, but that seems to be another bug).

So, open your Key config savefile (If you don't have one yet, just make one), search for the stick axes section and insert the correct axes.
Be aware, my rudder-twist (on my ancient Wingman 3d) axis was not just "Z", but "RZ", so you might have to insert special axis names there, too. What I did to find this out is to look into the corresponding Il-2 1946 Key config file. So, you might have to do this, too for your rudder/throttle.

[Meusli]

Raptr is like xfire, I had a lot of trouble with CH Profile Manager my G15 keyboard and Raptr.
Do any of the buttons work like the trigger buttons, when I first loaded up the game the axis were already mapped and the trigger/pov switches were also. Also check in the devices and printer section in the start bar and see if there are any unknown devices listed in the bottom.

[Meusli]

I saw your post on the CH forums and was going to reply to you there, but here is as good. Like SsSsSsSsSnake and yourself I am running the same setup but have no problems with the detection of my equipment. I will try to help as best as I can.

What version of Windows are you using?
Are you using Raptr?
Do you have a G15 or similar keyboard?
Do you use the CH Control panel program?

When Revvin posted his .cmc I tried to create a map but had no luck getting COD to see my config so I do not use the CH control panel and just map the buttons straight to the devices.