Ok I give up, how do you get the joystick to work?

[wildone_106]

Thanks, I just did it but made no difference.

Originally Posted by rote7

Try to configure your joystick as "Preferred controller" if you haven't already done so.

[Devastat]

I think I had some problems also with extreme. Try this:

- Launch a game where you are already using extreme and play it for a moment

- Launch CoD and go to settings and controls and see if you can now set extreme to control axis, rudder etc..

[=XIII=Shea]

Originally Posted by wildone_106

Thanks, I just did it but made no difference.

wildone i had the same problem trying to assign my controls,what happened was that when trying to assign pitch,airleron both were conflicting the whole time,what i did a was un plug your joystick and re plug it then re-calibrate it and then it should work,it did 4 me

[Spike]

I have the same joystick,and same problem w/not being able to use the joystick w/this game,I thought I read that it works w/older joysticks?Arrows on the keypad don't cut it.Man this game needs a ton of patch's.It runs like a slide show.

[wildone_106]

The advice to first play another game with the joystick seemed to work, I was able to get it assigned after! Lets see if it stays assigned tho

[badaboom]

I have A Saitek X-52,The Throttle seems to work but my Rudder pedals and JoyStick are not getting recognize by the game.I've tried all the suggestions above.The Stick and Pedals work fine in DCS A-10C.

[SEE]

I had problems assigning my X52 main axis and throttle. Does each axis change from the default one shown in the box when you try to assign them? Mine would not change and the bar graphs showed no movement. I left the mouse cursor on the 'clear' box and kept the mouse button depressed and at the same time moved the corresponding stick axis - it suddenly recognised the axis and then repeated for the others. Been fine since but I saved the profile just in case.