Can anyone ID this engine component?

[SlipBall]

[quote=KG26_Alpha;123655]

Originally Posted by SlipBall

no it cant turn 360

the shaft only moves up and down about a 1/4 turn to apply tension to the spring.

Anyway thats irrelevant to the point of the disks purpose which is to attach cable components for rpm position.

OK then, thank's

[Wolf_Rider]

would it be a Flyweight, by any chance?


it spins and creates the forces necessary to determine underspeed or overspeed.... like a flywheel operated torsion wrench. (instead of levering the torsion wrench on a bolt head for example, to the specified torque as in your car's engine head bolts, the torsion levering is performed by RPM... kinetic energy, with the holes used to balance the wheel itself)

at least that's what the cut away engineering drawing (plus blurb) from the earlier link, looks to be ?

[KG26_Alpha]

Originally Posted by Wolf_Rider

would it be a Flyweight, by any chance?


it spins and creates the forces necessary to determine underspeed or overspeed.... like a flywheel operated torsion wrench. (instead of levering the torsion wrench on a bolt head for example, to the specified torque as in your car's engine head bolts, the torsion levering is performed by RPM... kinetic energy, with the holes used to balance the wheel itself)

at least that's what the cut away engineering drawing (plus blurb) from the earlier link, looks to be ?

No

[Wolf_Rider]

you sure?









also... http://www.thaitechnics.com/propelle...control_2.html





don'tcha just hate naming conventions, o lack of?

[KG26_Alpha]

Originally Posted by Wolf_Rider

you sure?

Yes