Urgently NEEDED for proper CEM ! IMHO ;)

[Azimech]

Originally Posted by borchi

Me to

I tried the following steps:

Oil and Radiator open
Mixture to rich
Magnetos on
Fuel flow to center tank

"I" to start the engine

But no success, the propeller stoped after some rotations...

In addition:
Switch on main battery,
switch on starter magneto (merlin),
switch on electric fuel pump,
check fuel pressure,
prime the engine,
prop pitch at fine,
(if it's there) set ignition timing to "start",
(if it's there) use oil dilution when temperature under 5 C.
And indeed, open the throttle, an inch or so.

I don't have CoD yet but this is from other simulations and/or manuals.