Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik > Daidalos Team discussions

Reply
 
Thread Tools Display Modes
  #381  
Old 04-25-2012, 07:33 PM
JtD JtD is offline
Il-2 enthusiast & Moderator
 
Join Date: Oct 2007
Posts: 903
Default

Real life ammo count is exactly the effect of that difficulty switch. Maybe you're lucky to be in aircraft that carry large amounts of ammo, or you're just an incredibly good shot so that you simply don't need a lot of ammo.

Planes that are fairly short on ammo are the Yak's, if you want to try them.
Reply With Quote
  #382  
Old 04-26-2012, 02:05 PM
idefix44's Avatar
idefix44 idefix44 is offline
Approved Member
 
Join Date: Dec 2010
Location: France
Posts: 139
Default Static respawn.

In IL2 1946 4.11m version.
Some static objects like AAA guns or cannons respawn after being destroyed.
It happend that I destroy some static objects.
I shoot them.
They burn. Server display Ennemy AAA destroyed.
After some time they respawn and open fire again...
Is it a bug.
If yes is it fixed in 4.11.1m ?

Thx all for your great job.
Reply With Quote
  #383  
Old 04-26-2012, 04:17 PM
Luno13 Luno13 is offline
Approved Member
 
Join Date: Oct 2011
Posts: 370
Default

I assume you're playing online.

The host can implement an AI respawn time into the mission. There is no bug.
Reply With Quote
  #384  
Old 04-26-2012, 08:56 PM
idefix44's Avatar
idefix44 idefix44 is offline
Approved Member
 
Join Date: Dec 2010
Location: France
Posts: 139
Default

Thanks Luno13.
I found the parameters in the [RespawnTime] section.
Reply With Quote
  #385  
Old 04-27-2012, 09:30 AM
FenbeiduO's Avatar
FenbeiduO FenbeiduO is offline
Approved Member
 
Join Date: Feb 2012
Posts: 30
Exclamation me-109 squadron sign

there always a big squa sign on the left side of plane under canopy. I have never seen so big sign in a historcal photograph before.

Last edited by FenbeiduO; 04-27-2012 at 09:53 AM.
Reply With Quote
  #386  
Old 04-28-2012, 02:53 PM
Fall_Pink? Fall_Pink? is offline
Approved Member
 
Join Date: Oct 2007
Location: Netherlands
Posts: 100
Default

4.11.1 AI / Jet bug:

Jets like He162 and Me262 can't take off anymore. They overheat when they're half way the runway and have diffculties gaining altitude. They fail to climb and/or their engines catch fire. Tested with he162 and single mission 'rapid strike mission'. With the rapid strike mission, the first he162 cannot gain sufficient alititude and crashes into the woods at the end of the runway.

edit: small correction. Bug is also present in 4.11 + hotfix. Base closure with YP80 catches fire when taking off and 'rapid strike' mission produces the same result. I.e. he162 is unabnle to take off and it's engine starts to burn.

Rgs,
Mark
__________________
Intel Core i7 2600 @ default clocks
MSI P67A-GD65A Motherboard
Vertex2 SSD
Raid1 1 Tb data disk
8GB DDR3-1600
MSI Geforce 680GTX @ default clocks
Hotas Cougar
X-Fi Music

Last edited by Fall_Pink?; 04-28-2012 at 03:33 PM.
Reply With Quote
  #387  
Old 04-28-2012, 08:21 PM
Luno13 Luno13 is offline
Approved Member
 
Join Date: Oct 2011
Posts: 370
Default

I just made tests and I have no issues with the jets. Make sure to increase power slowly. Too fast and the engine will catch fire.

Also, I tend not to add more than 80% power, to avoid overheating.

Acceleration is slow, and jerking the plane off the runway won't help. I pull back on the stick just enough to raise the nose. The plane will roll on the main wheels until it's "ready" to fly, and will lift off on its own at the right speed. Raise gear immediately, lower the nose to accelerate and raise flaps in increments.
Reply With Quote
  #388  
Old 04-28-2012, 08:26 PM
Fall_Pink? Fall_Pink? is offline
Approved Member
 
Join Date: Oct 2007
Location: Netherlands
Posts: 100
Default

Quote:
Originally Posted by Luno13 View Post
I just made tests and I have no issues with the jets. Make sure to increase power slowly. Too fast and the engine will catch fire.

Also, I tend not to add more than 80% power, to avoid overheating.

Acceleration is slow, and jerking the plane off the runway won't help. I pull back on the stick just enough to raise the nose. The plane will roll on the main wheels until it's "ready" to fly, and will lift off on its own at the right speed. Raise gear immediately, lower the nose to accelerate and raise flaps in increments.
Luno13,

Manually there will be no problem with any jet I guess and I think it's the auto pilot that messes it up some how.

I tested the he162 'rapid strike mission' with auto pilot enabled for take off. I checked a couple of times and nearly all of them crash into the hillside.

Please check if you get the same behavior with this mission.

Rgs,
Mark
__________________
Intel Core i7 2600 @ default clocks
MSI P67A-GD65A Motherboard
Vertex2 SSD
Raid1 1 Tb data disk
8GB DDR3-1600
MSI Geforce 680GTX @ default clocks
Hotas Cougar
X-Fi Music
Reply With Quote
  #389  
Old 04-28-2012, 10:32 PM
JtD JtD is offline
Il-2 enthusiast & Moderator
 
Join Date: Oct 2007
Posts: 903
Default

The Heinkels indeed crash, but it already happened in 4.09. Do you know the last version it worked with? Overheat in 4.11 came too quick for some jets, but this was corrected in 4.11.1 and should no longer be an issue. I haven't seen one catching fire on take off, yet.
Reply With Quote
  #390  
Old 04-29-2012, 12:41 AM
Aviar's Avatar
Aviar Aviar is offline
Approved Member
 
Join Date: Dec 2007
Location: New Jersey, USA
Posts: 545
Default

Quote:
Originally Posted by Fall_Pink? View Post
4.11.1 AI / Jet bug:

Jets like He162 and Me262 can't take off anymore. They overheat when they're half way the runway and have diffculties gaining altitude. They fail to climb and/or their engines catch fire. Tested with he162 and single mission 'rapid strike mission'. With the rapid strike mission, the first he162 cannot gain sufficient alititude and crashes into the woods at the end of the runway.

edit: small correction. Bug is also present in 4.11 + hotfix. Base closure with YP80 catches fire when taking off and 'rapid strike' mission produces the same result. I.e. he162 is unabnle to take off and it's engine starts to burn.

Rgs,
Mark
There is no bug here. The jet AI takes off perfectly fine in 4.11.1. Even the Player's plane (in offline missions) will take off correctly if the Autopilot is used. I'm not sure what your problem may be.

I tested the Rapid Strike mission and the jet AI all take off just fine. However, they do crash into the hill. This may be due to new FM's.

I tried a quick workaround and it worked. Just open the mission in the FMB and give all the 262 and 162 flights 65% fuel instead of 100%. This makes them lighter and they don't crash anymore.

Aviar
__________________
Intel i7-4790 4-Core @3.60GHz
Asus Z97-C Motherboard
16GB DDR-3 1600 SDRAM @800 MHz
NVIDIA GTX 760 - 2GB
Creative SB ZX SBX
Logitech X-530 5.1 Speakers
27" AOC LED - 2752
Logitech G15 Gaming Keyboard
CH FighterStick-Pro Throttle-Pro Pedals
Logitech G13 Gameboard
GoFlight GF-T8 Module
WIN 8.1
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:24 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.