FOV Mod help?

OVERSKY · #1 04-22-2012, 04:11 PM

Hey everyone, recently my friend's been unable to use hyperlobby to get a game going, so we've switched to using Tunngle, but I've run into a problem... Namely, that San's FOV changer doesn't seem to work while tunngle is active.. Is there a way around this or am I screwed? My friends and I don't like to play with the default FOVs, so is there a way to get some widescreen FOV's back?

Pressing PgDn doesn't bring the view out far enough.

Sorry, I posted this in the wrong sub-forum, my apologies. If an admin could move this, that'd be great

Whacker · #2 04-22-2012, 11:16 PM

Couple of things you'll need to ensure.

1. Did you set up your conf.ini properly as San's readme states? You'll have to add a section, the IP and a port.

2. Do you have the executable, it's config, and the two extra files installed in the root of your IL-2 directory where the il2 executable is? I found that I couldn't get it working right unless those two files were in the same folder.

3. Is your firewall blocking the program? Some folks have the built-in Windows firewall installed or a third party one (like Symantec Endpoint) which sometimes blocks the program from talking to IL2 and vica versa.

4. Do you have the FOV changer app keys set up properly? Are you using the proper keys and key combinations? Do you have the maximum FOV zoom out set too low?

OVERSKY · #3 04-23-2012, 01:12 AM

well, thats just it.. the FOV changer worked perfectly fine when I was using it with Hyperlobby, I just can't get it to work with Tunngle running. Ideas?

Whacker · #4 04-23-2012, 04:53 AM

Sure. My first idea is if you are going to ask for help, then actually follow and do what people suggest. Just because the program was working doesn't mean you have it set up right.

Tunngle looks like another one of those hub and spoke vpn model apps. Without going into detail, it's probably creating another virtual adapter on your pc which the game is using. Thus, since FOV changer communicates across the IP stack, and you have to tell it where to look and what to use, it can't find IL2. Go back and re-do what I suggested, guarantee it will fix your problem.

Untamo · #5 04-23-2012, 04:58 AM

S!

When Tunngle is active, it probably puts the machine on different LAN IP, so you must change the IL-2 conf.ini's one and the one in San's FOV changer accordingly. San's will probably detect this on its own (if started after Tunngle) and you can see the IP on the settings tab. Use the same IP on the conf.ini.

EDIT:
A question of my own: Have you guys any trouble changing the FOV with buttons? With clean 4.08 IL-2, the changer seemed to work 100% of the time using buttons to change the FOV, but with later versions not so much. Since that I've been using one analogue axis on the TM Cougar throttle to nudge the FOV the max (120 deg) when needed, as in after using the game default FOVs.

Whacker · #6 04-23-2012, 08:23 AM

A fellow cougar owner eh?

I configured San's so that it doesn't use any key modifiers (alt, ctrl, etc) and just bound three things. 60 FOV, 155 FOV (default flying), and decrease FOV in steps of five. The only other key I bound is "home" to restart the app when it loses track of the current FOV and drops back to that horrible default zoom. I don't use any of the analog axes, I bet you have the thumb wheel right, ant elev? I bound those 4 commands listed above to the black thumb hat on the stick right below the red cannon button. Up is 60, down is 155, right is decr FOV, left is home/restart. When I say bound, I mean that a little differently too, since I use JoyToKey to help with repeating and key bindings. For example, my decr FOV by 5 on the hat is set to repeat 10 times every sec with a 250 msec delay, so I have fine tune control and rapid zoom in if needed.

All said, I still prefer the Default FOV and FOVmod add-ons for Modact. San is a saint and deserves a medal for what he's done. But the program isn't that reliable, and I still find that it frequently craps out and I have to restart it, and it always craps out right when I need it most, like a split second before a glancing shot in a turning fight.

Untamo · #7 04-24-2012, 05:54 AM

S!

I use the one on the top as I use the antenna elevation rotary for elevator trim

And yes, I also use Joy2Key with the same hat as you

.. I use the down and right for the game's own zoom levels, and the left direction to press X with Joy2Key and I have bound X to "Default" in San's which I have set to 120 degrees. But it doesn't seem to work anymore. Not even if I press X on keyboard.