Sensitivity is backwards?

[O_TaipaN]

Here I was thinking I was flying without any input curve on default.. the planes seemed very sluggish and slow to respond to joystick movements compared to Rise of Flight but I thought it was just that WW2 planes are different..

Anyway checking controls sensitivity is at 100%, I thought that would mean fully sensitive i.e. no input curve. But it's actually more sluggish at centre like that.

So to get a linear input, you need to set sensitivity to 0% is that correct? It does feel like it after changing it.

What sort of sensitivity settings do most people fly with? 0%, 50%? 75%?

Anyone fly with the HOTAS Warthog - which sensitivity do you find best for all aircraft?

[Whiski]

I haven't tried putting my sensitivity to 0% but I do notice a sluggish response to my stick. I fiddled with the other settings but only put sensitivity to 75% figuring it would get worse if I went lower than that.

Will try it out when I get back to my desktop.

Whiskey

[David198502]

the controls seem way more smooth for me with 0% sensitivity and of course no deadzone....i recognized that after the first day of buying this sim...since then i always fly with these sensitivity settings.

[Borsch]

From what I know from racing games, 50% Sensitivity is the linear setting for steering wheels. I've put 50% in CloD and it seems to be the case indeed. Wether you want linear response is up to you of course.

[O_TaipaN]

Originally Posted by Borsch

From what I know from racing games, 50% Sensitivity is the linear setting for steering wheels. I've put 50% in CloD and it seems to be the case indeed. Wether you want linear response is up to you of course.

So 50% is linear and not 0%?

Anyone else find this?

Also is there any way to see the "shape" of the curve like in ROF and DCS? Would be easier to tell then. Also would be nice to customize it.

[David198502]

well i thought the 0% setting is the linear curve