![]() |
|
Controls threads Everything about controls in CoD |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Not quiet blow, but force it open.
Had my spit engine shot to bits, earlyer and as i was heading towards the sea, i try,d to open my canopy, but it would not open, anyways i ended up upside down in the sea ![]() so how do you, or can you force it open? regards Doc Also can you put engine fires out, by going into a steep dive? |
#2
|
|||
|
|||
![]()
As far as i can tell, you have to 'Open canopy' (with a key that you've mapped), then press control-E.
I think the early marks of Spitfires and Hurricanes didn't have a quick release mechanism on the hood so you can't jettison it. |
#3
|
|||
|
|||
![]()
Try CTRL+J. It´s default for jettison canopy.
|
#4
|
|||
|
|||
![]()
Blakduk is correct
The spit doesnt have jetison canopy You must open canopy then jump out so its press "O" then press "CTL-E" pressing CTL-J will leave you helplessly clawing at your canopy with a mounting sense of panic as you hurtle towards the ground in your burning wreck. But dont forget to unplug your radio chord ALT-SHIFT-R before jumping or you will stay attached to your falling aircraft even afer jumping unable to open your chute. Nah, not really, only joking. |
#5
|
|||
|
|||
![]()
Did any of you read what i said? i tryd to open it
ive got the open canopy setup on my warthog stick, but like i said it wouldnt open ![]() Last edited by Doc_uk; 04-26-2011 at 01:11 PM. |
#6
|
|||
|
|||
![]()
Could be damage or G-effects.
|
#7
|
|||
|
|||
![]()
I have just been pressing Cntrl+Space(default key) works fine in both allied and axis planes for me so far. I believe it is Toggle Cockpit
|
![]() |
|
|