![]() |
|
#1
|
|||
|
|||
![]()
S!
Please, fix the gunner in this plane! Its impossible to move the gun! Red have only this bomber playable ![]() |
#2
|
|||
|
|||
![]()
Hi Condor,
The blemheim gunner works, but remember - in order for it to move your engines need to be running as it is hydraulically controlled. When in the gunner position use the cntrl + O or shift + O keys to unlock/retract the gun (default keys) and your arrow keys will rotate the turret. Hope this helps. |
#3
|
|||
|
|||
![]()
S!
Thanks, Bliss I would try again, but I tried this and didint wok ![]() |
#4
|
|||
|
|||
![]()
Was there not also mentioned in one of the other threats to activate the hydraulic pump and switch it for the turret? CEM really is frightening
![]() |
#5
|
||||
|
||||
![]()
I've setup the 'Z' and 'X' keys to rotate the turret left or right, and have my joystick setup to control the gun - then it's just a matter of hitting Shift-F1 to zoom in and hitting one of my other joystick buttons for FOV 30o, then I'm ready to fire!
problem is the Rudder gets in the way, so I have to move the turret offset slightly left or right, then counter-offset the gun to shoot past the tail! ![]() ![]() .
__________________
. ======================================== . .....--oOo-- --oOo-- HE-111 --oOo-- --oOo--..... . ======================================== -oOo- Intel i7-2600K (non-clocked) -oOo- GA-P67A -oOo- DF 85 full tower -oOo- 1000W corsair -oOo- 8 GB 1600Hz -oOo- 2 x GTX 580 1.5M (295.73) -oOo- 240 SSD -oOo- W7 64bit -oOo- PB2700 LED 2560 x 1440 6ms 60Hz -oOo- ======================================== |
#6
|
|||
|
|||
![]()
Have a look in the sticky FAQ thread: http://forum.1cpublishing.eu/showthread.php?t=24782
It explains how turrets work (and why), among other things you might find useful ![]() |
#7
|
|||
|
|||
![]()
It would be cool to get the Blenhiem with the under nose mounted rearfire gun
|
#8
|
|||
|
|||
![]() Quote:
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|