Thanks and forget it; I´ve found it out
here:
The
BombSightAssist determines the operation of the MOD:
0: Off, no bombsight information is shown.
1: bombsight information in the Bombardier cockpit only.
2: bombsight information in Pilot and Bombardier cockpits.
3: bombsight information in any cockpit view of the plane.
The
BombSightAssistConf determines which information is shown:
0: Nothing.
1: Only bombsight angle.
2: Bombsight angle + time to ground.
3: Bombsight angle + time to ground + horizontal distance to target.
The
MixedSpeedbar determines:
0: You can only see the information of your plane in the speedbar (even when switching to another plane).
1: You can see in the speedbar the information of other planes in outside view.
The
FullSpeedbar determines:
0: You only see HDG info if the user or campaign settings specify NoSpeedBar setting.
1: You always see Speed, Altitude and HDG info even if the user or campaign settings specify NoSpeedBar.
The
PALMODsColor determines:
0: It will work the standard stock way, the color is always red for planes of any army.
1: It will show you the speedbar text (as the HUD messages) according to your army (Blue or Red), in a lighter Blue or Red when you change the external view to other same army flight or gray when you are seeing the properties of an enemy plane (as stated before not available in Multiplay missions).
The
ShowSIToo determines:
0: The operation is the same as the original Bomb Assist Speedbar and HUD Mod.
1: Apart from the units determined by SpeedbarUnits, you always have the SI (International System) present too (default is active).
And also this:
Values for
SpeedbarUnits:
SpeedbarUnits=1 (SI, International System = default)
SpeedbarUnits=2 (GB, British Imperial)
SpeedbarUnits=3 (US, US Imperial)
SpeedbarUnits=4 (TAS SI, International System)
SpeedbarUnits=5 (TAS GB, British Imperial)
SpeedbarUnits=6 (TAS US, US Imperial)