View Single Post
  #4  
Old 10-28-2012, 05:52 AM
*Buzzsaw* *Buzzsaw* is offline
Approved Member
 
Join Date: Oct 2007
Location: Vancouver Canada
Posts: 467
Default

Salute

I tested my guns, by putting yellow tracers on the outboard guns on both sides, and red tracers on the inboard on both sides.

That way I could watch the fire from both sides and check both sides were working. I also checked by firing blip bursts into water, when I could see all 8 rounds hit.

My guns were fine, but previously I had manually copied and pasted all my guns settings into the "User" file in my "Documents/1C Softclub/il2 sturmovik cliffs of dover/ after I had problems with getting the 100 octane Spit to accept custom settings. People might want to try this if they are getting problems.