I chose my components with overclocking in mind however the problem I have is that the computer has four bootable hard drives with their own O/S which are used by various members of my family. If I use Bios settings they have to work for all the drives so, having an Asus board, I am just using the EPU utility on my CloD drive to be safe.
I have it in turbo mode and raise the setting slider 1% every few days or so. I generally get a blue memory dump screen of death but after a reboot or two it settles down and behaves. It is up to 17% at the moment has a marked improvement on CloD. The fps dips when encountering effects like clouds, hits and dust are greatly improved. Once it refuses to go any higher I will give After Burner a go an see if I can push the CPU a bit.
|