Quote:
Originally Posted by MadTommy
Having a few issues with this.
1st time I loaded up the Hurricane campaign, training mission 1, everything was fine. But had a bad landing so i decided to do it again.
On retrying i could not get my plane to roll, stuck on the runway, full throttle, just stuck.
So i tried the 2nd training mission, same thing, Wellington never took off, and I couldn't either.
I'll head over to their site for help... for the money paid it would be nice to have less typo mistakes and german messages in english version. |
I had exactly the same problem with the brakes and couldn't get my Hurricane to move and it eventually broke itself apart on the runway. Tapping the brakes key did nothing.
Turned out that it was my toe brake assignments in the config. When I edited them, they were stuck at 50% and inverted. When I clicked on left brake and pressed the pedal, they reset to the correct levels, and the same for the right. That shouldn't of made any difference of course as the Hurricane doesn't have toe brakes, but removing the 'invert axis' and stepping on them in the configuration fixed my problem, and I've flown the mission a couple of times now without any problems...
Edit: I flew the mission again later and the problem came back, but I found out that tapping the brakes key worked.