Quote:
Originally Posted by Talisman
Having been out turned by a Me 109 E a few times when flying a Hurricane, I decided to check my CloD control calibration (green bars for input and output) and found that I was not getting full elevator deflection.
After giving the joystick some vigorous movements, full forward and back a few times, it appeared to reset to my original settings with full deflection. This seems to happen to me on an intermittent basis (when flying Me 109 too). I suspect that it may be my joystick, which is rather old now, so I plan to order a new one soon.
|
Its worth making sure that after turning on your joystick (if it isn't when you start up) and before you start the game that you move the stick through all its movement, including throttle. Sometimes if I don't my PC assumes that certain axes are at 100% when at 50% or so so there is not full movement and I have to move the stick through all its axes in the air when i realise which is dangerous. It might not be your joystick, just the way that calibration works.