[RickRuski]

Results with my Sli are similar to Septic's, you are soon aware if your Sli isn't working as it should. One card will be idling with hardly any use and the other will be running near 90--99% and temps will be up. My system shows both cards in Sli using near 95---100% V/ram and the use between the 2 cards is within 2% of each other (one using the most then the other). Temps are about 57--62deg in Sli and don't normally go over that. This is the first rig that I've built with Sli and the next one will be Sli also unless technology changes to someting better, but whatever my next board is it will have the option for either. I see that a lot of modern boards (the better ones have the option for either Sli or Crossfire) are set up for multi cards so are the detractors saying the technology is wrong. A few years ago it was hard to get a M/b with this sort of technology now a lot of manufactures are doing it.