I have put bends in ply, by running a saw 1/8 of an inch deep, mutiple cuts from top to bottom, on the "in" side. Was using 5/8 ply, and not the same degree of curve, but it's an idea.
__________________
CPU: Intel Core i7-3770 Quad-Core Socket 1155 @3.4GHz
GPU: ASUS NVIDIA GeForce GTX 670 2GB GDDR5
RAM: Corsair Vengeance Blue 16GB (4x4)
SSD: Intel 520 Series 240GB
HDD: WD Black 1000GB (1TB)
MoBo: ASUS P8Z77-V Socket 1155 Intel Z77 Chipset
OS: Windows 7 Home Premium 64bit
|