Artist, I'm looking to be able to create a updspeed gauge setup that includes seperate data for each engine.
From searching it not sound like anyone was able to do this................but again, most of the threads dealing with the gauges on a second display are older then the newest patch.
Best as I could tell the device link txt has not changed from 2004 and it seems like the few people who went a little deeper into making updspeed gauge setups mentioned that multi-engine data for gauge display was not working........................newer patch has the CEM abilities for the multi-engines...............so I was wondering if that had an effect on the issue.
Device link txt looks like it has not changed/edited since 2004 on my install. Looking at it I see what you descibe above so what I sounds like I need to do is have something like:
Select engine #1 (command 123), then call get() for rpm and manifold..., select engine #2 (command 125) then call get() for rpm and manifold...............same as for water temp and oil temp/pressure?
|