
06-19-2011, 08:33 PM
|
Approved Member
|
|
Join Date: Apr 2011
Location: Stockholm
Posts: 837
|
|
Quote:
Originally Posted by klem
You're basically right but the wings could only be level under one particular set of circumstances when the torque is perfectly counteracted by rudder alone. Under other conditions one wing will be low as the rudder cannot perfectly offset the torque under all conditions.
Here's what Alex Henshaw said about production testing the Spitfire MkV:
"After a thorough pre-flight check I would take off and, once at circuit height, I would trim the aircraft and try to get her to fly straight-and-level with hands off the stick. The MarkV lacked aileron trim tabs and most new ones tended to fly one wing low. When that happened I would land immediately and a mechanic would bend the trailing edge of the aileron up or down and then bend the other aileron in the opposite direction. Then I'd take off again and trim it hands off to see if the wing dropping had been cleared." They could often get it right first time.
The wing high/low tendency would return if he went outside the speed/power etc settings by some margin as the torque would be different.
|
Friggin kewl! I want it.
|