I have a G940 and had the same issue. Control-Options-Axes Category: Aircraft
I fixed it by having the throttle axis selected and then adjusting the 100% position to 1.00.
On the right you will see two bars 'Out: In:'
As you adjust the throttle I see In: go from 1:00 to -1:00 (0 centred) and Out: from 0 to 1.10.
With 100% Position at 0 I see the non-linear response where at In: 0.76 I see Out: 0.38 and then as I push the throttle forward Out: jumps up.
|