Change sensitivity of 6DoF
 

Big ups to TD for introducing 6DoF in 4.11. It makes the early P-47 and the thick-framed 109's much easier to fly.

I have 6DoF set to my joystick hat, but I'm finding it too sensitive; I nudge the hat as briefly as I can, but my pilot's head moves too much for my liking. Any way to adjust this?

Thanks

Woke Up Dead

I do not recall the details at the moment but there should be an entry in the conf.ini file to regulate 6DoF speed movements

check 4.11 guide

List of new conf.ini parameters
...
[HookView Config]
LeanF=0.4 (Speed of head forward/backward leaning. Range 0.01 to 1 with higher number
giving faster motion)
LeanS=0.4 (Speed of head sideways leaning. Range 0.01 to 1 with higher number giving
faster motion)
Raise=0.2 (Speed of head up/down motion. Range 0.01 to 1 with higher number giving faster
motion)
RubberBand=0.5 (elasticity of the head motion limits)

That worked, thanks. I had to add those parameters to the file though, they weren't there to be modified originally.

just for curiosity - does it make any difference if I adjust things in conf.ini,
or use the trackir software to adjust movement speeds?

I think, you can use both to get the same results. At least, you can combine it to some degree. I kept the setting in conf.ini at default values and use only TIR software for refinements.