Official Fulqrum Publishing forum - 1/25 scale Trumpeter Fw 190 Dora The mount of Feldwebel Werner

Well heres my 1/24 scale Trumpeter Fw 190 Dora The mount of Feldwebel Werner Hohenberg 1./JG 2 Aachen 1st January 1945, under going a major over haul, alot of work to produce this Butcher Bird as you now see it...enjoy..

Model size approx 44cm x45cm

The Fw 190 D (nicknamed the Dora; or Long-Nose Dora, "Langnasen-Dora") was intended to improve on the high-altitude performance of the A-series enough to make it useful against the American heavy bombers of the era. In the event, the D series was rarely used against the heavy-bomber raids, as the circumstances of the war in late 1944 meant that fighter-versus-fighter combat and ground attack missions took priority. A total of 1,805 D-9s were produced.[47] Production started in August 1944.[47]

The liquid-cooled 1,750 PS (1,726 hp, 1,287 kW) Jumo 213A could produce 2,100 PS (2,071 hp, 1,545 kW) of emergency power with MW 50 injection, improving performance to 426 mph (686 km/h) at 21,650 ft (6,600 m). In order to fit the new engine in the Fw 190 fuselage while maintaining proper balance, both the nose and the tail of the aircraft were lengthened, adding nearly 1.52 m (4.99 ft) to the fuselage, bringing the overall length to 10.192 m (33.438 ft) versus the 9.10 m (29.9 ft) of the late war A-9 series. The lengthened tail required a straight-sided bay, 30 cm (12 in) long, spliced in forward of the rear angled joint and tail assembly of the fuselage. To further aid balance, the pilot's oxygen bottles were moved aft and located in the new bay. This gave the rear fuselage a "stretched" appearance.[48]

Furthermore, the move to a V12 engine from a radial engine required more components to be factored into the design, most significantly the need for coolant radiators (radial engines are air-cooled). To keep the design as simple and as aerodynamic as possible, Tank used an annular radiator (the AJA 180 L) installed at the front of the engine, similar to the configuration used in the Jumo powered versions of the Junkers Ju 88. The annular radiator with its adjustable cooling gills resembled a radial engine installation, although the row of six short exhausts stacks on either side of the elongated engine cowling showed that Jumo 213 was an inverted vee-12 engine.

http://i173.photobucket.com/albums/w...7-08132110.jpg

http://i173.photobucket.com/albums/w...7-08132204.jpg

http://i173.photobucket.com/albums/w...7-08132347.jpg

http://i173.photobucket.com/albums/w...7-08133104.jpg

http://i173.photobucket.com/albums/w...7-08132559.jpg

http://i173.photobucket.com/albums/w...7-08132512.jpg

http://i173.photobucket.com/albums/w...7-08132440.jpg

http://i173.photobucket.com/albums/w...7-08132532.jpg

http://i173.photobucket.com/albums/w...7-08132134.jpg

http://i173.photobucket.com/albums/w...7-08132226.jpg

http://i173.photobucket.com/albums/w...7-08132505.jpg

http://i173.photobucket.com/albums/w...7-08132947.jpg