Official Fulqrum Publishing forum - Throttle Quadrant levers are recognized only 30%

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)

- Controls threads (http://forum.fulqrumpublishing.com/forumdisplay.php?f=194)

- - Throttle Quadrant levers are recognized only 30% (http://forum.fulqrumpublishing.com/showthread.php?t=20302)

Royraiden

04-02-2011 11:58 AM

Throttle Quadrant levers are recognized only 30%

After mapping my axes for trim, throttle, mixture and radiator I noticed that only 30% of the levers are recognized.What do I need to do for the sim to recognize the full movement of the axes?

Strike

04-02-2011 12:01 PM

Quote:

Originally Posted by Strike (Post 249468)

Make sure you set the small sliders in the "axis" window from 0% to 100%.. I had this issue too. If the minimum is set to 0. and the maximum to 5% travel. Then you throttle will go from 0 - 100% ingame when you slide your hotas beyond 5%.

try that :)

Lookie

Royraiden

04-02-2011 12:03 PM

Thanks a lot, I will try that.

O_TaipaN

04-15-2011 09:13 PM

Hi,

Once you have it going how do you like the CH Quadrant?

Would you recommend it over the Saitek?

Cheers

All times are GMT. The time now is 03:41 AM.