Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   Technical threads (http://forum.fulqrumpublishing.com/forumdisplay.php?f=191)
-   -   Instuctions on how to turn the filter off on the russian version (http://forum.fulqrumpublishing.com/showthread.php?t=19598)

Bryan21cag 03-28-2011 06:50 AM

Instuctions on how to turn the filter off on the russian version
 
So i read somewhere that this is how you turn the filter off by adding the AntiEpilepcy = 0 line rite under the BOB line of the INI file located in C:/users/(your name)/MyDocuments/1CSoftClub/IL2 Cliffs of Dover/

can someone please confirm that this is correct. im still not sure if im seeing the props and things as they should be so im not sure this is working but it could just be all the shuddering that is masking the changes.

Thanks

(Example below)

[BOB]
AntiEpilepcy = 0
[window]
DepthBits =24
StencilBits=8
DrawIfNotFocused=0

Tvrdi 03-28-2011 07:51 AM

I wonder If we put that line in the config.ini of western version.....

Devastat 03-28-2011 08:06 AM

That should be it, tho you might want to write it all without spaces. Run the game then exit and restart your computer and run the game again and see if there is a difference.

Bowtome 03-28-2011 08:29 AM

Why restart your computer??

Devastat 03-28-2011 08:35 AM

I think you should restart the game at least after installation and restart steam after editing the ini file, also remove the cloud steam setting in steam. My game was very stuttery at first and now runs very smooth (in flying solo), so i am a bit confused what "fixed" my game. It was either restarting computer after installation or restarting steam after adding the antiepilepcy line on the info file.

SG1_Gunkan 03-28-2011 08:41 AM

Quote:

Originally Posted by Bryan21cag (Post 242216)
So i read somewhere that this is how you turn the filter off by adding the AntiEpilepcy = 0 line rite under the BOB line of the INI file located in C:/users/(your name)/MyDocuments/1CSoftClub/IL2 Cliffs of Dover/

can someone please confirm that this is correct. im still not sure if im seeing the props and things as they should be so im not sure this is working but it could just be all the shuddering that is masking the changes.

Thanks

(Example below)

[BOB]
AntiEpilepcy = 0
[window]
DepthBits =24
StencilBits=8
DrawIfNotFocused=0

I tryed but not working for me, and i followed all the steps (no cloud, manual editing the config.ini and son on). I can't see any difference, i have two ideas of why:

1. It's only a placebo, but |Zuti| write it on a forum and i think he is betatester.
2. In high end computer, like mine, you don't see any FPS problems with this filter. With a GTX560 you can run the game at FULL QUALITY and even with AA or anisotropic on. The terrain is like the 2005 forgotten battles one, so it's very easy for actual computer to run it. Only cockpit and big bomber formation looks hard to "move". My computer runs Crysis 2 at 1920x1200 with full quality on and 42FPS, so IL2:CoD it's like candy for western computers. The actual sluttering problem if coming from simulator core, not graphical part.

This is how i run the game in a high end computer:
http://www.youtube.com/watch?v=mmsslf05KMY

The game only uses 2Gb max memori in the Channel map, i remember the old Finland map of Forgottern Battles to be much hard for memory. And even the mod channel map version needs more memory. They really make an amazing work in IL2:CoD about loading times and system requeriment.

David198502 03-28-2011 09:01 AM

should i make a space in the conf.ini file like this:
AntiEpilepcy= 0

or like i did:
AntiEpilepcy=0
?????

Bryan21cag 03-28-2011 09:13 AM

Quote:

Originally Posted by David198502 (Post 242295)
should i make a space in the conf.ini file like this:
AntiEpilepcy= 0

or like i did:
AntiEpilepcy=0
?????

not sure yet i asked adonys this and he thinks it is suppose to have the spaces in it. But then again he is not sure if that line is even working yet as it may require a patch for the game before it will work and even then they might change the name to be spelled correctly after the patch so we may just have to wait and see:)

Bryan21cag 03-28-2011 09:15 AM

Quote:

Originally Posted by SG1_Gunkan (Post 242273)
I tryed but not working for me, and i followed all the steps (no cloud, manual editing the config.ini and son on). I can't see any difference, i have two ideas of why:

1. It's only a placebo, but |Zuti| write it on a forum and i think he is betatester.
2. In high end computer, like mine, you don't see any FPS problems with this filter. With a GTX560 you can run the game at FULL QUALITY and even with AA or anisotropic on. The terrain is like the 2005 forgotten battles one, so it's very easy for actual computer to run it. Only cockpit and big bomber formation looks hard to "move". My computer runs Crysis 2 at 1920x1200 with full quality on and 42FPS, so IL2:CoD it's like candy for western computers. The actual sluttering problem if coming from simulator core, not graphical part.

This is how i run the game in a high end computer:
http://www.youtube.com/watch?v=mmsslf05KMY

The game only uses 2Gb max memori in the Channel map, i remember the old Finland map of Forgottern Battles to be much hard for memory. And even the mod channel map version needs more memory. They really make an amazing work in IL2:CoD about loading times and system requeriment.

Thank you for posting this yours seems to be running a bit smoother then mine is but i am leaving my crossfire enabled so this might be the cause either way it looks like the finished goods will be just awe inspiring IMHO :)

Gamekeeper 03-28-2011 09:46 AM

The Anti epilepsy setting is a myth, it doesn't work, it may be an option in the Russian version in the future.


All times are GMT. The time now is 05:46 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.