Three monitors
 

Hello DT

I have a small question regarding the new resolution that will have the simulator. I currently use three monitors of 32 "each. My current resolution is 5760 x 1080. The options menu does not have that resolution. Has a resolution but pretty close to what I need, just that the picture looks pretty bad.

http://imageshack.us/a/img402/6739/grab0068.jpg

Here you can see the result. I put the two side monitors at 90° of the center monitor and I can be immersed as if within the aircraft cockpit. It is fantastic.

http://imageshack.us/a/img853/7558/grab0027.jpg

http://imageshack.us/a/img853/7558/grab0026.jpg

http://imageshack.us/a/img853/7558/grab0025.jpg

http://imageshack.us/a/img853/7558/grab0024.jpg

http://imageshack.us/a/img853/7558/grab0023.jpg

http://imageshack.us/a/img853/7558/grab0022.jpg

http://imageshack.us/a/img853/7558/grab0021.jpg

http://imageshack.us/a/img853/7558/grab0020.jpg

http://imageshack.us/a/img853/7558/grab0019.jpg

http://imageshack.us/a/img853/7558/grab0018.jpg

http://imageshack.us/a/img853/7558/grab0017.jpg

http://imageshack.us/a/img853/7558/grab0016.jpg

http://imageshack.us/a/img853/7558/grab0015.jpg

http://imageshack.us/a/img853/7558/grab0014.jpg

http://imageshack.us/a/img12/2808/grab0012m.jpg

http://imageshack.us/a/img28/1928/grab0011.jpg

http://imageshack.us/a/img850/1643/grab0010.jpg

http://imageshack.us/a/img402/1326/grab0009v.jpg

http://imageshack.us/a/img850/8652/grab0008.jpg

http://imageshack.us/a/img21/6405/grab0007.jpg

http://imageshack.us/a/img855/9651/grab0006a.jpg

http://imageshack.us/a/img35/8921/grab0005p.jpg

http://imageshack.us/a/img199/6259/grab0004d.jpg

http://imageshack.us/a/img521/1285/grab0003.jpg

http://imageshack.us/a/img203/8412/grab0048.jpg

http://imageshack.us/a/img254/3310/grab0002s.jpg

http://imageshack.us/a/img692/5117/grab0000n.jpg

You can see parts of the cockpit that could never be seen in other resolutions. The feature 3x800x600x32 not be expanded due to limitations of the game, so kindly suggest if you can consider this little feature to be 3x1920x1080x32. The automatic change of the conf.ini file is this:

[window]
width=2400
height=600
.
.
.
Use3Renders=1

If I change these values​​, I lose the characteristic of the three video monitors and just get in the center monitor.

[window]
width=5760
height=1080

I've been using San's IL2 Fov program too, but unfortunately the image on the left and right edges are stretched deforming any object, even the clouds look pretty bad. Not compared with the results I have shown here. I no longer use San's IL2 Fov program.

Thank you

PD: Can you update the P-38 Lightning to have this effect?

http://imageshack.us/a/img232/4921/p3878.jpg

Indeed, very nice views!
I've tried to use 3 monitors but I've failed!
I have a 23 inch monitor (center) and two 17 inch monitors (sides). Even if on my card (Nvidia GT430) I have 3 connectors (HDMI, VGA and DVI) when I connected the third monitor I received the message that my videocard can't support 3 monitors!
Any suggestions?
Or do I need a better videocard and nothing else can't be done?

The solution to get three working monitors
 

Hello snake

I had the same problem. The solution? You must buy one of these:

http://www.amazon.com/PowerColor-DVI...488833&sr=8-11

http://www.amazon.com/StarTech-com-D...8488833&sr=8-3

Remember the cable must be "Active", if you connect a regular cable it will not work.

Hope it helps

It doesn't!
The displayport shown in your link is the connector suitable for Apple Mac. I have a normal PC!

Check again, because mine is a normal PC like yours and my video card is:
http://www.newegg.com/Product/Produc...82E16814131474
and is working perfectly. I have a fourth monitor but I use it for TV only.

Looks like I don't have a display port!
My card is this: http://www.newegg.com/Product/Produc...82E16814134147

@P38L: I don't know, how the new feature of 'reading the resolutions out of the system specs' will work with your triple setup - none of us has that - we will want to have your feedback of course.

As about the P-38... it will look better than that in your pic:

https://dl.dropboxusercontent.com/u/...f/grab0313.jpg

How about this?

http://www.youtube.com/watch?v=Uxgw49x4VZw

http://forum.aviaskins.com/showpost....2&postcount=20
http://forum.aviaskins.com/showthread.php?t=1853

Three monitors
 

Hello Sita

Are you using San's IL-2? or what configuration are you using?

Hi)

nope ... i just know guy who made his own mod for three monitors
each monitor 1920х1080 with total resolution is 5760х1080

Maybe this will work
 

Not sure if this will work for you, but this is the best I could do for my setup.
Change your center monitor to a resolution of 1440X900
Change your 2 outer monitors to a resolution of 1152X864
Change your conf.ini to

[window]
width=3744
height=936
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=0
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=1
Use3Renders=1

[GLPROVIDER]
GL=Opengl32.dll

[GLPROVIDERS]
Open GL=Opengl32.dll
DirectX=dx8Wrap.dl

Hi Sita
 

Thank you very much, now is working fine with your configuration.
But tell me, Do you know how the other guy managed to use 5760x1080? because that is the resolution I currently have, but I cannot make it work in IL-2.

No sorry