Official Fulqrum Publishing forum - 4.11

Page 6 of 8

« First

Show 100 post(s) from this thread on one page

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)

- Daidalos Team discussions (http://forum.fulqrumpublishing.com/forumdisplay.php?f=202)

- - 4.11 - 6DoF debugging (http://forum.fulqrumpublishing.com/showthread.php?t=29041)

Ra'Kaan

02-05-2012 01:06 AM

Quote:

Originally Posted by kpax (Post 387716)

Hello,

On C6 forum JV69_Kartoffe gave me the solution. IL2.exe and TrackIr.exe must run both with same rights : admin or not. So I put both executables to run in admin mode and I got back the TiR hotkeys while running IL2.:grin:

If this can help some body....

Salute

Thank you, fixed me right up!

FenbeiduO

02-09-2012 05:21 PM

Hi,Dear DT!

The 6dof in 4.11 is works as 5dof (for me?). I mean the other 1axis are useless...(sorry~) --->I can't ZOOM sight forward/backward effectivly anymore in game like 4.10with 6dof mod before.To explan myself clearly I made a video
http://youtu.be/GuAWAvZL6S0
(sorry for the fps)
OR is there anything（like[HookView Config]）wrong with my conf.ini？
mine:
[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=0.4
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=2
LeanF=1
LeanS=0.5
Raise=0.4
RubberBand=0.6

kpax	02-11-2012 12:27 PM

Hello,

Have you checked this :
"Then check, if you are in flight position and not in aiming position (where 6DoF is disabled) - to change between both use Shift+F1. " ?

Quote:

Originally Posted by FenbeiduO (Post 389136)

[FONT="Comic Sans MS"][SIZE="4"]The 6dof in 4.11 is works as 5dof (for me?). I mean the other 1axis are useless...(sorry~) --->I can't ZOOM sight forward/backward effectivly anymore in game like 4.10with 6dof mod before.

MicroWave

02-11-2012 12:44 PM

Quote:

Originally Posted by FenbeiduO (Post 389136)

6DoF consists of 3 rotation angles and 3 moving axes:
left-right motion
up-down motion
forward-backward motion
rotation in azimuth
rotation in tangage
roll
Roll of the camera is only possible for TiR devices.

Zooming in/out is a completely separate feature.

FenbeiduO

02-11-2012 03:20 PM

Quote:

Originally Posted by MicroWave (Post 389782)

Zooming in/out is a completely separate feature.

Thanks for the reply microwave.I can distinguish between zoom and 'forward/backward motion'feature now.:)

Tanks for your eagerness kpax :)

BTW:I propose to combine zoom and F/Bward motion fountion.In the game zoom is a high frequency used feature. If so,that will more effective than we use key or axis.:grin:

perproqra

02-15-2012 05:58 PM

DOF with mouse

Is there a way to switch DOF controlled by mouse to :

when I press the LeftMouseButton I move the head X (left/right) and Y axis (up and down)
???

Now. By the defoult mouse controlling XX (left/right) and Z (front/back)
i want to switch Z with Y

-=MadCat=-

03-05-2012 01:30 AM

If you switch to "gunsight view" in the Heinkel Lerche, you don't look down far enough anymore.
The ultra-sound altimeter and vertical speed indicator are impossible to see now, unless you bend the head, outside of "gunsight view", in a really odd position.

Good night everyone !

Treetop64

03-05-2012 02:28 AM

Don't know if this was mentioned already. This occurs when using the mouse to look around. After about 30 minutes or more in mission the view begins to become a bit spastic and jittery when looking around. This "view spasm" only occurs for a moment as the player looks around with the mouse. Once this does begin to occur, it only happens when the player looks somewhere quickly. If the player pans the mouse slowly the spasm does not happen.

MOG_Hammer

03-10-2012 12:45 AM

Quote:

Originally Posted by jermin (Post 379985)

Not a bug.

The default height of line of sight (when Shift + F1 is disabled) is a bit lower than the aiming line in Bf-109s and Fw-190s. I have to stretch my head upwards and rightwards to get the reticle into the center of the revi sight in order to aim, which will make my neck uncomfortable after some time of playing.

Could you please consider lifting the default line of sight to the same height of the aiming sight so that we only need to move our heads a little to right to aim?

Use your trackIR software to edit your TrackIR profile in the x axis to make it go further away when only moving a little. Do the same to your Y axis so you will not have to raise or lower your head much. Rembember I am not talking about your pitch and yaw axis. BTW you might use the TrackIR 5 software (compatible with TrackIR 4 pro and TrackIR 5 devices) which is easier to understand and set up.

Ace1staller

03-11-2012 04:28 PM

Fix the Throttle system on the Fw-190A-4. TD, I realized it only reaches 88% in flight and its unfair because its harder to get the plane moving fast at a 100% throttle. Also please fix the landing gear on the F4F-3 Wildcat. It refuses to open when I was pressing the button that lowers the gears. :eek:

All times are GMT. The time now is 05:48 AM.

Page 6 of 8

« First

Show 100 post(s) from this thread on one page