Decided to replace my first generation Saitek Eclipse Keyboard. Repalced it with a Logitech G150. Everything works now.

The JoystickID proggy is a handy little tool. Didn't fix my problem, but a danged nice tool to have onhand! Thanks for pointing me to it.

Control fix after patch installation
 

Gents, to save some frustrations I offer the following advice. After the 14821 and 15950 patches, CoD play was normal so long as I activated through Steam within 24 hrs each day. After leaving CoD for a few days and coming back to restart, XPro Joystick, throttle, rudder peddles and Cyborg keyboard lost functionality. This past week had no throttle, I key would not start engine, O key would not open canopy yet I had M key, lean forward, aileron, elevator, rudder and flap controls working. Tried rebooting numerous times, downloaded new drivers for AMD 6870 Cross-fire GPUs and trying to re-set keys/axis settings. Only when I unplugged all controllers, added the original keyboard and restarted the system then CoD did I regain functionality. I shut the system down, hooked up all my Saitek controllers, restarted the system and opened CoD via Steam and then CoD finally recognize all the controller settings. All is fine now after a week of frustration.

My system: CyberpowerPC Gamer Ultra 2063LQ Phenom II x6 1090T Dual AMD Radeon HD 6870 GPUs using Cross-fire and Win 7 64 bit OS. Controllers are Saitek X52 Pro, Saitek Rudders and Saitek Cyborg keyboard and headset. System works great, fast, crystal clear on a 60 inch Sharp Quattron.

Thanks for the patch, new sounds are awesome. First time I fired up the Spit engine and opened her up on takeoff and later when I cracked the canopy on a landing approach I was very impressed with the sound quality. Gun sounds still need work. Just take that new sound and multiply by eight. Been in the Army for 30 plus years and I know the sound of multiple machine guns versus one gun firing. Great work look forward to the next installment.

Hello All:

I'm a newbie to Cliffs of Dover. I recently purchased Cliffs of Dover from Steam.

It appears that input from my joystick and pedals (Saitek X52 and Pro Flite pedals) are not completely recognized.

I try to set the controls directly through the game settings, no profiles or Saitek software.

I disconnected my rudder pedals to see if it would recognize the joystick only, but no effect.

I notice in the Options/Controls menu Axes settings it does indicate “Joystick 2 + X” and “Joystick2 + Y” for the ailerons and elevator and “Joystick 1 + Z” for the rudder pedals.

When I attempt to fly a mission, the X52 throttle appears to be responsive but the joystick (ailerons and elevator) and rudder pedals are unresponsive. In the Controls menu Axes settings the throttle appears only as “Joystick + Z.”

My joystick and rudder pedals function normally in my other games.

Some of my system specs, if these are helpful:

Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_qfe.120504-1617)

Memory: 3326MB RAM


DirectX Version: DirectX 9.0c (4.09.0000.0904)
DxDiag Version: 5.03.2600.5512 32bit Unicode

Card name: NVIDIA GeForce 9800 GT
Display Memory: 512.0 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)

DirectInput Devices
-------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a

Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a

Device Name: Saitek X52 Flight Control System
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x06A3, 0x0255
FF Driver: n/a

Device Name: Saitek Pro Flight Rudder Pedals
Attached: 1
Controller ID: 0x1
Vendor/Product ID: 0x06A3, 0x0763
FF Driver: n/a

Device Name: Dell USB Keyboard Hub
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x413C, 0x2006
FF Driver: n/a

Device Name: Dell USB Keyboard Hub
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x413C, 0x2006
FF Driver: n/a

Device Name: Dell USB Keyboard Hub
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x413C, 0x2006
FF Driver: n/a

Poll w/ Interrupt: No
Registry: OK

USB Human Interface Device
| | Vendor/Product ID: 0x06A3, 0x0255
| | Location: Saitek X52 Flight Control System
| | Matching Device ID: usb\class_03
| | Service: HidUsb
| | OEMData: 03 00 88 11 22 00 00 00
| | Driver: hidusb.sys, 4/14/2008 00:15:28, 10368 bytes
| | Driver: hidclass.sys, 4/14/2008 00:15:28, 36864 bytes
| | Driver: hidparse.sys, 4/14/2008 00:15:24, 24960 bytes
| | Driver: hid.dll, 4/14/2008 05:00:00, 20992 bytes
| |
| +-+ HID-compliant game controller
| | | Vendor/Product ID: 0x06A3, 0x0255
| | | Matching Device ID: hid_device_system_game
| | | OEMData: 03 00 88 11 22 00 00 00
| |
+-+ Saitek Pro Flight Rudder Pedals (USB)
| | Vendor/Product ID: 0x06A3, 0x0763
| | Location: Saitek Pro Flight Rudder Pedals
| | Matching Device ID: usb\vid_06a3&pid_0763
| | Service: HidUsb
| | OEMData: 00 00 00 00 00 00 00 00
| | Driver: hidusb.sys, 4/14/2008 00:15:28, 10368 bytes
| | Driver: hidclass.sys, 4/14/2008 00:15:28, 36864 bytes
| | Driver: hidparse.sys, 4/14/2008 00:15:24, 24960 bytes
| | Driver: hid.dll, 4/14/2008 05:00:00, 20992 bytes
| |
| +-+ Saitek Pro Flight Rudder Pedals (HID)
| | | Vendor/Product ID: 0x06A3, 0x0763
| | | Matching Device ID: hid\vid_06a3&pid_0763
| | | Service: SaiH0763
| | | OEMData: 00 00 00 00 00 00 00 00
| | | Driver: SaiH0763.sys, 6/8/2006 02:37:53, 179968 bytes
| | | Driver: SaiC0763.Dll, 6/8/2006 02:37:53, 897024 bytes
| | | Driver: SaiC0763_07.dll, 6/8/2006 02:37:53, 7680 bytes
| | | Driver: SaiC0763_09.dll, 6/8/2006 02:37:53, 6656 bytes
| | | Driver: SaiC0763_0A.dll, 6/8/2006 02:37:53, 7680 bytes
| | | Driver: SaiC0763_0C.dll, 6/8/2006 02:37:53, 7680 bytes
| | | Driver: SaiC0763_10.dll, 6/8/2006 02:37:53, 7680 bytes
| | | Driver: SaiC0763_11.dll, 7/12/2007 19:22:40, 5632 bytes
| | | Driver: SaiC0763_0402.dll, 6/8/2006 02:37:53, 6656 bytes


Thanks!