Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   Performance threads (http://forum.fulqrumpublishing.com/forumdisplay.php?f=195)
-   -   IL-2 Cliffs of Dover Cliffs of Dover Optimization and Performance Thread (http://forum.fulqrumpublishing.com/showthread.php?t=29004)

ATAG_Snapper 02-24-2012 04:06 PM

Quote:

Originally Posted by Ribbs67 (Post 391938)
A few quick things... For NVIDIA users, that update their drivers. When you stall your drivers, the first thing you need to do is go into the control panel and set them to single display mode. They default at multi gpu setting . Like were all running sli or crossfire setups. This will give a decent performance increase.
I also found the shimmering bad.. I went in the config file in the 1C documents folder.I set Drawifnotfocused=0 to 1. I didn't see a hit in frames, and it seemed to reduce the shimmering quite a bit. I also don't notice the constant draw in circle that is around the aircraft. Possibly helped with studdering.
I'm not saying this is the HolyGrail of tweak.. but it seemed to work well for me.. give it a shot and report your results..:grin:

Oh.. and Im also running the Gtx 460.. but its the 2gig version running at 800 Hz.. ;)

Thanks, Ribbs, I'll give it a try!

d.burnette 03-15-2012 01:07 AM

Quote:

Originally Posted by Ribbs67 (Post 391938)
A few quick things... For NVIDIA users, that update their drivers. When you stall your drivers, the first thing you need to do is go into the control panel and set them to single display mode. They default at multi gpu setting . Like were all running sli or crossfire setups. This will give a decent performance increase.

Ok this is probably going to be a dumb question but here goes:
When I install my Nvidia drivers, yes multi diplay mode is selected - now I run two monitors, on my single GTX 460 video card. I always assumed this mode was selected automatically, since I have two active monitors attached?

Are you saying that option is related to runing two or more video cards, rather than the number of monitors?

d.burnette 03-15-2012 09:31 PM

Quote:

Originally Posted by kestrel79 (Post 380554)
Yeah I can't believe how much better my system runs CloD now after these tweaks. Before I was using all high and med settings, but it looks like I had a few things on high that should of been on med. And building amount set to unlimited sounds like it would be bad but in fact it actually helps.

I also did the splash screen trick and I'm sure helped as well.

How does one disable the splash screen? I have just installed this sim, have gone into the video options and adjusted them per this thread's recommended settings.
Also I am not seeing an intro video? I think I have seen this mentioned somewhere here, should there be one?

Thanks,

zahnartz62 04-29-2012 06:22 PM

I HAVE BEEN VERY FRUSTRATED BY THE SLOW DOWN AND STUTTERING in CoD..thanks to this thread things are much better. I DL Game Booster and it seems to work. I adjusted my video options and was able to increase them. I now turn off Trend virus and other programs staying offline. I am unable to turn off Windows media and will keep trying to find the panel that offers on-off choices Win 7 64. I have been taking these behind the scenes programs for granted until the frame rate problem was pointed it. Many Thanks

tk471138 05-05-2012 02:50 AM

Quote:

Originally Posted by zahnartz62 (Post 417193)
I HAVE BEEN VERY FRUSTRATED BY THE SLOW DOWN AND STUTTERING in CoD..thanks to this thread things are much better. I DL Game Booster and it seems to work. I adjusted my video options and was able to increase them. I now turn off Trend virus and other programs staying offline. I am unable to turn off Windows media and will keep trying to find the panel that offers on-off choices Win 7 64. I have been taking these behind the scenes programs for granted until the frame rate problem was pointed it. Many Thanks

you might want to go to RUN in the start menu, and then type in services.msc
be careful about what you disable, you might want to go to a website called black viper http://www.blackviper.com/AskBV/askBV.htm (this isnt the exact link to the page you want but the website has all the services listed and then describes what they do and if you need them enabled, im sure you will find the correct page on the blackviper website)

also for start up programs, same thing go to run in start menu type in MSCONFIG

find the tab at the top that says startup...these are your programs that start up automatically when your comptuer starts,


both of these menus will allow you to either disable or enable background services....

WARNING: PLEASE PLEASE be careful, disabling programs can have negative effects on your computer....be certain it is safe to disable the program in question...



ALSO if anyone can help me i need to know the folder where the cache is at...i forgot...thanks!!!

katdogfizzow 05-07-2012 05:47 PM

Quote:

Originally Posted by d.burnette (Post 399257)
How does one disable the splash screen?
Thanks,

In your Steam folder, go to "SteamApps\common\il-2 sturmovik cliffs of dover\parts\core\GUI". Rename "Logo.wmv" to any random name and it wont appear anymore

Updated orig post thx

broken pixel 07-21-2012 05:26 PM

Finally after five plus days of tweaking, reinstalling Clod. My tri- fire set up will do max settings, 4x, SSAO enabled with vsync. Im getting steady, smooth, almost hicup free gaming. I'm using Radeon Pro with AFR friendly crossfire rendering. I used to not be able to enable that one because it would flicker bad.
Huh? Must of hit the right combo sets I guess.

I still get horrible smoke flickering during the black death track. I have tried changing the LOD, makes no difference. I did the config ini tweaks, no difference.

I did change to realistic gunnery so there is less smoke produce.
It feels like I'm pounding them with 10,000 rounds. I will get multiple direct engine hits at close range and they still fly on looking like swiss cheese.

Black Death
http://i11.photobucket.com/albums/a1...t/5f27ae7f.jpg
-
http://i11.photobucket.com/albums/a1...t/afac84b5.jpg
-
http://i11.photobucket.com/albums/a1...t/958bee87.jpg
Taken with my iPhone

Flanker35M 07-23-2012 11:23 PM

S!

Broken Pixel, by the looks of your pics I get similar FPS with my single 7970HD. Maybe you should try to see what VSync Off does? SSAO seems to have less negative effect with latest betas than in last official patch.

broken pixel 07-24-2012 12:34 AM

I switched drivers and I'm using 12.4s and I don't get the flickering with ARF off.
When I don't use vsync the prop tears alot when I'm in the cockpit view.
The problem is the massive FPS drop, my min. FPS are fine with the 12.4s.
No matter the driver there is always a huge drop in frames. :(
I sold my 6990 with with waterblock on eBay last night for 550.00.
Yay! I am going to the green side again choosing a GTX 680 Classified. :•)

Flanker35M 07-24-2012 07:17 AM

S!

Congrats on a good deal :-) Still staying with AMD myself, very few if any problems with it. Did consider 680GTX, but in games I play both brands seem to be pretty equal in performance. Anyway please post your results when getting the new card :-)


All times are GMT. The time now is 04:28 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.