Official Fulqrum Publishing forum

Page 2 of 2

Show 100 post(s) from this thread on one page

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)

- IL-2 Sturmovik: Cliffs of Dover (http://forum.fulqrumpublishing.com/forumdisplay.php?f=189)

- - What resolutions (http://forum.fulqrumpublishing.com/showthread.php?t=19103)

TheGrunch

03-08-2011 05:55 PM

Quote:

Originally Posted by Crossfade (Post 232242)

i've just talked the wife into letting me get a 46 inch Sony led and native res is 1920x1080 so didn't want an Epic fail when i show her the difference.
but i think your right should not be a problem.

thanks again for the reassurance :grin:

Niiice...I'd have talked a bit longer and more piteously and bagged a 1920x1200 one myself. ;)

Feuerfalke

03-08-2011 06:50 PM

Quote:

Originally Posted by Crossfade (Post 232227)

didn't know that it could go more than 1024x768 because in setup it would only go to that and no more.
so will cod go much higher as standard or will it be the same as il2 and u have to mess with config.

Btw thanks for the replys

As posted before, even IL2 had higher settings available if you had the monitor supporting it.

However, these standard-settings were limited to 4:3.

If you have a 16:9 or 16:10 you're limited to the next lower resolution available in 4:3.

As others have stated, any resolution is possible, including spanning multiple monitors.

I have no doubt that CoD will offer even more options.

BTW: I can at least tell you, that IL2 looks great on 42" 1920x1080 (FullHD)

Crossfade

03-09-2011 12:36 AM

I bet it does can't wait for cod
:grin:

camel24hrs

03-09-2011 01:25 AM

Quote:

Originally Posted by Feuerfalke (Post 232280)

How did you get IL-2 to run at 1920x1080? I have a 22.5" 1920x1080 monitor and a geforce 560ti and the max resolution the program gives me is 1600x1200.

mcmatt

03-09-2011 05:23 AM

I play IL2 at 1920 x 1200. You must edit conf.ini in window block in your Il-2 root directory, which you can open in Notepad or similar. Do not forget to do backup of your original file.

[window]
width=1920
height=1200
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=1
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=0
Use3Renders=0

TheGrunch

03-09-2011 07:51 AM

...of conf.ini in your Il-2 root directory, which you can open in Notepad or similar. Missing a rather important piece of information there, mcmatt. ;)

mcmatt

03-09-2011 08:15 AM

Quote:

Originally Posted by TheGrunch (Post 232465)

...of conf.ini in your Il-2 root directory, which you can open in Notepad or similar. Missing a rather important piece of information there, mcmatt. ;)

You're right Grunch ;) Not everybody is messing with conf.ini

All times are GMT. The time now is 04:05 PM.

Page 2 of 2

Show 100 post(s) from this thread on one page